CHAdeMO port for B-Class ED "JdeMO"

[TonyWilliams]

We have opened up $1500 deposits for JdeMO for the B-Class ED / B250e

https://shop.quickchargepower.com/JdeMO ... lassED.htm

[TonyWilliams]

We started "monkeying around" with JdeMO for the B-Class ED today. I think it's going to be pretty straight forward.

Link to photo: http://s565.photobucket.com/user/TonyWi ... sort=1&o=0

[Lgmachado]

We started "monkeying around" with JdeMO for the B-Class ED today. I think it's going to be pretty straight forward.

Link to photo: http://s565.photobucket.com/user/TonyWi ... sort=1&o=0

Hi Tony,

I am considering buying a B-class in Portugal and I wonder if you where able to retrofit the fast charging solution into a B-Class, and if so is there a step by step tutorial for me to install one once I purchase my b-class?

best regards

Luis

[GlennD]

As far as I know he has a number of installer in the US. I think Tony will install in Europe but you have install costs plus airfare.

Dangerous voltages are involved and it is not a DIY project for most people.

[JeffRay]

Concur. Bump.

[promedic]

I installed Jdemo on my RAV4 EV with a friend (a HV trained Toyota mechanic). You just need a workshop with "High Voltage" expirience. With Tonys installation manual we fixed it in 1 1/2 hours.

Clemens from Austria

[TonyWilliams]

We have opened up $1500 deposits for JdeMO for the B-Class ED / B250e

https://shop.quickchargepower.com/JdeMO ... lassED.htm

[TonyWilliams]

I am happy to report that we performed the first DC fast charge on the 2014-2018 Mercedes B-Class ED / B250e.

We will be offering kits called “JdeMO” that allow your car to recharge in 30-45 minutes, using 18,000 public CHAdeMO station worldwide.

Specifications:

40kW charge rate
125 amps @ 354 volts maximum
124 miles added per hour charging
200 km added per hour charging

Available for shipping January 2019. Place to deposit here:

https://shop.quickchargepower.com/JdeMO ... lassED.htm

[TonyWilliams]

Testing is going well. I drove to a public fast charge station yesterday, with just 1 mile remaining.

Within 23 minutes, I had 44%.

[TonyWilliams]

We will pick up the P0 production hardware set from the waterjet company today, and send it to the fabrication shop.

The first ten production JdeMO v3.0 circuit boards for the Mercedes are in production (100 PCBs have already been received... this step is populating the boards with components).

I hope to have this hardware mounted on our company Mercedes by next week, however, the US national holiday of Thanksgiving will likely push that to the following week.